ORKKA PVC Glue

A transparent, medium-consistency adhesive ideal for PVC pipes and fittings up to 6″ in diameter, including schedules 40 and 80. Recommended for use in potable water pipes, pressure pipes, and ventilation systems.

INSTRUCTIONS

Cut the pipe square and remove all burrs. Clean and dry the surfaces to be joined. Shake well and apply ORKKA PVC PIPE CEMENT to the inside of the fitting and then to the pipe end. Assemble the connection and apply a half-turn. Hold the joint firmly for 30 to 40 seconds. Wipe away any excess product with a clean cloth.

PRECAUTIONS

Avoid breathing vapors. Use only outdoors or in well-ventilated areas. Use non-sparking tools only. Take precautionary measures against static discharge. Keep away from heat, sparks, open flames, and hot surfaces. Avoid smoking. Vapors may accumulate in low-lying areas and ignite explosively. Keep the container tightly closed in a cool place. Wear protective gloves and eye protection. Wash thoroughly after handling. Do not eat or drink while using this product.

KEEP OUT OF REACH OF CHILDREN.